PPAP中英文报告模板-7.表面处理检验报告

邮箱Email备注Remarks评估Evaluatedby职责Title批准Approved检测结果判断Inspectionresults:结论Comments:日期Date职责Title检验Inspectedby拒收Failed有条件接受Approvedwithdeviation重新送样Resubmit邮箱Email日期Date客户验证VerifiedbyCustomerGB/T9286-98室温Roomtemperature21°±2°相对湿度Relativehumidity3M胶带检测结果Inspectionresultson3Mtape外观Appearance厚度Thickness色差Colordeviation产品表面检测结果Inspectionresultsonproduct处理工艺Process50°±5°检测方法Testmethod备注Remarks项目Items1.用百格刀在涂层表面用力画下100片小方格UseCross-cuttestertodraw100panesoncoatingsurface;2.将3M胶带牢固地粘在方格上，然后迅速拉起3M胶带，通过检测方格上涂层脱落的面积来做判定涂层附着力Adherepanesfirmlywith3Mtape,thenpullaparttapequickly,inspectpaintingqualitybycheckinghowmuchcoatingisflakedoffonpanesareaandgettheresults3.用膜厚仪检测涂层厚度Usethicknessgaugetoinspectthicknessofcoating4.色差比对Colordeviationinspection技术要求Technicalrequirements1.5B级：百格边缘基本完好，没有涂层从方格脱落5BClasses:Theedgesofthecutsarecompletelysmooth,nocoatingwasflakedofffrompanes2.4B级：切口的相交处有小片剥落，划格区内实际破损≤5%4BClasses:Onlysmallflakesofthecoatingattheintersectonsofthecross-cutarea,nomorethan5%isaffected.3.4B级以下不可接受Classeslowerthan4Barenotacceptable4.喷粉厚度要求最小80μmThicknessrequirementofpaintingismin.80um工具Tools1.百格刀Cross-cuttester2.3M胶带3Mtape3.膜厚仪Thicknessgauge4.涂层样板Coatingproofplate测试标准TeststardandSurfacetreatmentinspectionreport(Cross-cuttest)表面处理检测报告(百格测试)产品名称PartName产品编号PartNo.版本号DrawingRev.到货日期ArrivalDate检验日期InspectDate样本数量SampleQty.