O型密封圈压缩量计算

内螺纹连接器序号代号基本尺寸公差计算结果0.3227.62-0.3226.980.092.74-0.092.560.0527.4027.350.06232.062032-0.0831.92-0.14231.8580.053.45-0.053.35001.82.653.555.31.11.51.82.7序号代号活塞密封max8.13min7.71max5.90min5.15max2.36min2.30max0.44min0.20max16.06%min7.97%max179.02min152.05max-12.47%min2.34%max3.03min2.579r10.312.26%沟槽宽度（活塞密封）86O型密封圈体积约束条件d1d2d3d4113.412349b27.32.6527.353232d9O圈内径小于沟槽槽底直径13t径向密封O型圈槽深O型橡胶圈压缩量计算输入O型圈内径O型圈截面直径活塞密封沟槽底径缸体内径活塞直径（活塞密封）O型圈槽宽（无挡圈）备注≥d145O型橡胶圈压缩量计算输出0.1-0.3倒角长度槽底圆角半径槽棱圆角半径0.4-0.816zr1r2O型圈截面直径d21415最小倒角长度zminO型密封圈压缩量O型密封圈压缩率名称7O型密封圈截面积减小量123槽截面积（装配）O型密封圈截面积单边槽深尺寸（装配）0.2-0.4内螺纹连接器内螺纹连接器