汽轮机机A级检修备品备件材料计划

#1汽轮发电机组大修管理文件第一卷大修前期准备文件大修备品配件及材料计划二0一四年十月三十日#1机组大修备品备件计划序号材料名称规格型号(图号)及材质单位数量生产厂家使用方向备注一类物资1.特制双头螺栓74.011.019条4高压内缸2.特制双头螺栓74.011.020条4高压内缸3.特制双头螺栓74.011.021条4高压外缸4.特制双头螺栓74.011.022条4高压外缸5.罩螺母00.011.057个4高压外缸6.罩螺母00.011.060个4高压外缸7.罩螺母00.011.170个4高压外缸8.中压缸、高压内缸罩螺母00.011.007个49.高压内缸罩螺母00.011.089个410.高压外缸下球面垫圈74.011.029个411.高压外缸上球面垫圈74.011.030个412.高压外缸下球面垫圈74.011.024个413.高压外缸上球面垫圈74.011.023个414.中压缸特制双头螺栓74.015.011条415.中压缸罩螺母00.011.007个416.中压缸特制双头螺栓74.015.024条417.中压缸特制螺母74.015.025个418.中压缸特制双头螺栓74.015.028条419.中压缸特制双头螺栓74.015.017条420.中压缸特制双头螺栓M52×285条421.中压缸下球面垫圈74.015.015个422.中压缸上球面垫圈74.015.016个423.中压缸特制双头螺栓M76×43574.015.014条424.中压缸下球面垫圈74.015.012个425.中压缸上球面垫圈74.015.013个426.中压缸穿孔罩螺母M52×3个427.隔板套穿孔罩螺母M36个428.隔板套单耳止退垫圈74.036.004个429.隔板套特制双头螺栓M36×110条430.隔板套穿孔罩螺母M30个431.隔板套单耳止退垫圈74.036.004个432.隔板套特制双头螺栓M30×100条433.高压缸前汽封汽封圈74.071.6Z圈1234.高压缸后汽封汽封圈74.072.4Z圈635.中压缸前汽封汽封圈70.068.13Z圈536.中压缸前汽封汽封圈74.073.4Z圈137.中压缸后汽封汽封圈74.074.5Z圈138.中压缸后汽封汽封圈74.074.3Z圈1139.中压缸后汽封汽封圈74.074.4Z圈140.低压缸汽封汽封圈74.075.2Z圈241.低压缸汽封汽封圈74.075.3Z圈242.24-27级隔板汽封圈74.148.3Z圈243.29-32级隔板汽封圈74.148.6Z圈244.高压缸前汽封弹簧片74.071.015片20045.高压缸前后汽封弹簧片00.071.011片20046.中压缸前、后汽封弹簧片74.073.011片12047.低压缸汽封弹簧片74.075.006片5048.低压缸汽封弹簧片00.071.016片5049.2～12级隔板弹簧片10500.071.002片10050.13级隔板弹簧片13200.071.006片2051.20～22级隔板弹簧片13200.071.016片4052.隔板用弹簧片15274.148.009片10053.隔板用弹簧片15274.148.009片16072.特制螺母M36×2-6H70.302.313个4高压自动关闭器73.特制螺母M36×2-6H70.302.313个2中压自动关闭器74.衬套70.307.309个2中压自动关闭器75.夹紧环70.307.310个2中压自动关闭器76.特制螺母M36×2-6H70.307.313个2中压自动关闭器77.特制垫圈70.307.311个4中压自动关闭器78.螺母70.319.303个4高压调节阀操纵座79.特制双头螺栓70.318.304个2高压调节阀操纵座80.特制螺母M36×270.319.303个4中压调节阀操纵座81.特制罩螺母M56×4-6H74A.301.00125Cr2MoVA个20高压主汽调节阀82.特制双头螺栓M56×4-6g74.301.01320Cr1Mo1VTiB个20高压主汽调节阀83.主汽门门盖垫片74A.301.105个2高压主汽阀84.衬套74.301.031个4高压调节阀85.夹紧环74.301.033个4高压调节阀86.垫片74.301.032个4高压调节阀87.特制垫圈74.301.034个4高压调节阀88.特制螺母M36×2-6H74.301.036个4高压调节阀89.压紧螺母74.301.040个2高压调节阀90.预启阀座74.301.041个2高压调节阀91.调节阀杆74.301.027个1高压调节阀92.高压前轴封体螺栓GB21C-76M12×45条20高压前轴封体93.特制垫圈74.301.061个4门杆漏汽94.特制垫圈74.301.060个16门杆漏汽95.直通管接头组DN4000.000.15Z个2门杆漏汽96.直通管接头组DN3200.000.15Z个16门杆漏汽97.特制罩螺母M56×4-6H74.306.019个10中压主汽阀98.特制双头螺栓M56×4-6g74.306.018个10中压主汽阀99.衬套74.306.025个2中压主汽阀100.特制螺母M36×2-6H74.306.026个2中压主汽阀101.齿形垫片74.306.031个2中压主汽阀102.特制垫圈74.306.037个4门杆漏汽103.特制垫圈74.301.060个4门杆漏汽104.直通管接头组DN2000.000.15Z个2门杆漏汽105.直通管接头组DN3200.000.15Z个2门杆漏汽106.特制螺母M30×2-6H74.306.026个4中压调节阀107.螺母74.314.012个2中压调节阀108.垫套74.314.014个2中压调节阀109.衬套74.314.004个4中压调节阀110.夹紧环74.314.003个4中压调节阀111.特制垫圈74.314.002个4中压调节阀112.阀杆74.314.001根1中压调节阀113.六角头螺栓GB21-76M12×50条20中压缸前轴封体114.六角头螺栓M16×2L=50条48高中压缸弹性环115.螺栓M42×240GB5782-86条26低压缸116.穿孔罩螺母M4200.011.049个26低压缸117.特制垫圈74.314.016个4门杆漏汽118.直通管接头组DN2500.000.15Z个4门杆漏汽119.直通管接头组DN4000.000.15Z个4门杆漏汽120.活塞环74.085.008个28进汽短管121.特制螺栓M4874A.085.001条5进汽短管122.螺母M4874.085.010个5进汽短管123.紧定螺钉M24×120B20.26-72条12进汽短管124.齿形垫圈00.301.027个6高压主汽管二类物资1密封油系统胶圈套1大连宝源科建电力设备制造有限公司密封油系统2滤芯HC9020FKS8Z个2主油泵3滤芯HC6200FKP8Z个2自循环滤芯4滤芯HC4754FKP13Z个1有压回油5滤芯HC9020FKP4Z个10油动机6滤芯WU-630×180F-J个2主油泵入口7滤芯WU-160×180-J个2循环再生泵入口滤芯8滤芯30-150-207J-6个1硅藻土滤芯9滤芯PYX-1266个1纤维滤芯10胶圈套1哈汽自控EH油系统11全不锈钢耐震压力表YTN-63H25MPa2.5级ZG1/4块10EH油系统12全不锈钢耐震压力表YTN-63H3.5MPa2.5级ZG1/4块7EH油系统13轴向带边全不锈钢耐震压力表YTN-63HZT25MPa2.5级ZG1/4块3EH油系统14双头螺柱M20×60GB898-76个50中压调节阀15六角螺母M20GB898-76个50中压调节阀16双头螺柱M24×80GB898-88个24中压主汽阀17螺母M24GB6170-86个24中压主汽阀18双头螺柱M30×80GB6170-86个24高压调节阀19双头螺柱M20×70GB898-88个50高压调节阀20六角螺母M20GB6170-86个50高压调节阀21指针74B.318.009个4高压调节阀操纵座22双头螺柱M20×55GB898-88个30高压调节阀操纵座23六角螺母M20GB6170-86个30高压调节阀操纵座24六角螺母M20GB6170-86个100高压自动关闭器25双头螺柱M20×80GB898-88个100高压自动关闭器26不锈钢带1mm卷5轴瓦检修27不锈钢带0.5mm卷5轴瓦检修28不锈钢带0.3mm卷5轴瓦检修29不锈钢带0.2mm卷5轴瓦检修30不锈钢带0.1mm卷5轴瓦检修31不锈钢带0.05mm卷5轴瓦检修32紫铜棒Φ50×2m根2主机检修33紫铜棒Φ10×1m根2主机检修34紫铜棒Φ40×1米根1主机检修35无缝管12Cr1MoVΦ38×4米30主汽疏水36无缝管12Cr1MoVΦ32×4米30主汽疏水37黄铜棒Φ120米0.5加工给水电动门门套38黄铜棒Φ130米0.5主汽电动门门套39导轴承压盖A270NLTG—5D件1凝结水泵47导轴承A270NLTG—5D件1凝结水泵48首级密封环270NLTG—5D件1凝结水泵49导轴承压盖B270NLTG—5D件1凝结水泵50导轴承B270NLTG—5D件1凝结水泵51次级密封环270NLTG—5D件4凝结水泵52导叶套270NLTG—5D件4凝结水泵53密封套270NLTG—5D件8凝结水泵54导轴承压盖C270NLTG—5D件2凝结水泵55导轴承C270NLTG—5D件1凝结水泵56导轴承D270NLTG—5D件1凝结水泵57轴套A270NLTG—5D件1凝结水泵58轴套B270NLTG—5D件1凝结水泵59轴套C270NLTG—5D件1凝结水泵60轴套D270NLTG—5D件1凝结水泵61轴套270NLTG—5D件1凝结水泵62机封部件270NLTG—5D套1凝结水泵63上机封270NLTG—5D套1凝结水泵64下机封270NLTG—5D套1凝结水泵65轴套胶圈Φ75×3.55件1凝结水泵66内压盖胶圈Φ135×5.7件1凝结水泵67压盖胶圈Φ135×5.7件1凝结水泵68O型圈Φ65×3.1件8凝结水泵69O型圈Φ38×3.1件16凝结水泵70O型圈Φ275×5.7件1凝结水泵71O型圈Φ490×5.7件1凝结水泵72O型圈Φ530×5.7件4凝结水泵73O型圈Φ680×5.7件1凝结水泵74O型圈Φ710×8.6件1凝结水泵75O型圈Φ850×8.6件1凝结水泵76高压侧机械密封200TSBII-J件2给水泵77低压侧机械密封200TSBII-J件2给水泵78吸入端油挡“O”形胶圈200TSBII-J件8给水泵79吸入端密封套筒“O”形胶圈200TSBII-J件6给水泵80吸入端轴套“O”形胶圈200TSBII-J件2给水泵81吸入端水封体“O”形胶圈200TSBII-J件2给水泵82首级中段“O”形胶圈200TSBII-J件2给水泵83二级中段“O”形胶圈-1200TSBII-J件2给水泵84二级中段“O”形胶圈-2200TSBII-J件2给水泵85三级中段“O”形胶圈-1200TSBII-J件2给水泵86三级中段“O”形胶圈-2200TSBII-J件2给水泵87四级中段“O”形胶圈200TSBII-J件2给水泵88五级中段“O”形胶圈200TSBII-J件2给水泵89平衡鼓“O”形胶圈200TSBII-J件2给水泵90吐出端轴套“O”形胶圈200TSBII-J件2给水泵91平衡板“O”形胶圈200TSBII-J件2给水泵92大端盖“O”形胶圈200TSBII-J件2给水泵93吐出端水封体“O”形胶圈200TSBII-J件2给水泵94吐出端密封套筒“O”形胶圈200TSBII-J件2给水泵95吐出端油挡“O”形胶圈200TSBII-J件2给水泵96轴承端盖“O”形胶圈200TSBII-J件2给水泵97首级中段“Yx”形胶圈-1200TSBII-J件2给水泵98首级中段“Yx”形胶