03-Rhino命令介绍之三——曲线命令

Rhino命令介绍之三——曲线（curve）1.左键：controlpointcurve/右键：curvethroughpointsCommand：curve/curvethroughpt左键：控制点曲线；右键：通过多个点创建曲线（编辑点）；2.左键：curve:interpolatepoints/右键：handlecurveCommand：interpcrv/handlecurve左键:控制点曲线；右键：手柄控制曲线3.InterpolateonsurfaceCommand：interpcrvonsrf再曲面上创建控制点曲线4.HandlecurveCommand：handlecurve手柄控制曲线5.左键：sketch/右键：sketchonsurfaceCommand：sketch（onsurface/onmesh）/sketch-onsurface左键：手绘曲线/右键：在曲面上手绘曲线6.SketchonpolygonmeshCommand：sketch-onmesh在网格上手绘曲线7.左键：curve：controlpointsfrompolyline右键：curvethroughpolylineverticesCommand：curvethroughpolyline左键：以多段线顶点为控制点创建曲线/右键：以多段线顶点为编辑点创建曲线；8.左键：conic/右键：conic:perpendicularatstartCommand：conic（tangent/perpendicular）/conic-perpendicular左键：创建二次曲线/右键：控制创建曲线的起始方向与曲线上某一点垂直；9.左键：conic:tangentatstart/conic:tangentatstart,endCommand：conic-tangent左键：控制创建曲线的起始方向与曲线上某一点相切；右键：起始与结束均相切；10.左键：parabolabyfocus/右键：parabolabyvertexCommand：parabola（vertex/markfocus）/parabola-vertex左键：通过焦点确定抛物线；右键：通过顶点确定抛物线；11.HyperbolaCommand：hyperbola（fromcoefficient/fromfoci/fromvertex）创建双曲线12.左键：helix/右键：verticalhelixCommand：helix（vertical/arroundcurve）/helix-vertical左键：水平方向螺旋线；右键：垂直方向螺旋线13.左键：spiral/flatspiralCommand：spiral（flat/vertical/aroundcurve）/spiral-flat左键：空间螺旋线；右键：平面螺旋线14.TweenbetweentwocurvesCommand：tweencurves介于两条曲线中间创建曲线；