奥科模拟网关中文配置

SupportQQ:342080839奥科模拟网关中文使用手册SupportQQ:3420808391配置网关IP................................................................41.1登陆web修改IP.......................................................41.2使用BootP－tftp软件修改IP..........................................41.2.1设置软件参数...................................................41.2.2修改IP........................................................52MP114配置端口呼入、呼出..................................................62.1ProtocolManagement—ProtocolDefinition—DTMF&Dialing...........62.2ProtocolManagement—AdvancedApplications—FXOSettings.........72.3ProtocolManagement—EndpointPhoneNumbers........................82.4ProtocolManagement—HuntGroupSettings...........................82.5ProtocolManagement—EndpointSettings—AutomaticDialing........92.6ProtocolManagement—RoutingTables—TeltoIPRouting..........102.7ProtocolManagement—RoutingTables—IPtoTrunkGroupRouting..102.8ProtocolManagement—AdvancedParameters—SupplementaryServices112.9Maintenance.........................................................122.10AdvancedConfiguration—ConfigurationFile.......................123MO118-FXS与MO118-FXO配置端口呼入、呼出.................................133.1ProtocolManagement－RoutingTables－TeltoIPRouting..............133.2ProtocolManagement－RoutingTables－IPtoHuntGroupRouting.......143.3ProtocolManagement－EndpointPhoneNumbers.........................163.4ProtocolManagement—AdvancedApplications—FXOSettings........173.5ProtocolManagement－EndpointSettings—AutomaticDialing...........173.6AdvancedConfiguration－MediaSettings－VoiceSettings..............183.7传送主叫号码设置....................................................193.7.1ProtocolManagement—EndpointSettings—GenerateCallerIDtoTel193.7.2ProtocolManagement—EndpointSettings—CallerIDPermissions..203.7.3ProtocolManagement—AdvancedParameters—SupplementaryServices213.7.4ProtocolManagement—AdvancedParameters—SupplementaryServices213.7.5AdvancedConfiguration—MediaSettings—Fax/Modem/CIDsettings....................................................................224奥科软座席设置............................................................234.1修改IP地址........................................................234.2调节增益...........................................................234.3设置电话号码位数...................................................244.4设置SAS...........................................................254.5设置TeltoIPRouting.............................................254.6设置IPToHuntGroupRoutingTable................................264.7设置自动外拨.......................................................274.8设置本端号码.......................................................274.9设置拨号模式.......................................................284.10设置HuntGroupSettings...........................................294.11保存重启...........................................................294.12配置文件导入导出...................................................305奥科中继网关的常见问题解决办法............................................30SupportQQ:3420808395.1拿到AudioCodes中继网关后应该用什么方式登陆到中继网关里？.........305.2AudioCodes不同型号的中继网关默认IP是多少？.....................305.3AudioCodes中继网关默认登陆用户名和密码是多少？...................305.4如果忘记IP地址后应该怎样登陆？...................................315.5中继网关已经可以登陆进去了，怎么把默认的中继网关IP改为公网IP地址？315.6如果有一台中继网关正在使用，我想把另一台AudioCodes中继网关配置成相同配置，但我不知道怎么配置，怎么办？......................................315.7如何更改AudioCodes默认密码？.....................................315.8如何改变WEB页面登陆默认8080端口？..............................315.9如果通话中感觉有回音怎么办？.......................................315.10如果通话时感觉声音较小怎么办？.....................................325.11如果通话正常，但拨分机不能切断拨号音怎么办？.......................325.12如果使用SIP协议时，回铃消息为180时怎么办？.....................325.13传真无法发送成功...................................................32SupportQQ:3420808391配置网关IP1.1登陆web修改IPAudioCodes的所有型号中继网关默认IP为10.1.10.10，TP1610/SB1610中继网关默认IP为10.1.10.10与10.1.10.11登录web修改，用户名：Admin，密码：Admin。登录后点击QuickSetup，更改IP后点击reset键重启后生效。1.2使用BootP－tftp软件修改IP网关背面标签写有MAC地址，使用BootP软件根据MAC地址修改网关IP。1.2.1设置软件参数点击Edit---preferences弹出参数选择窗口，设置如下图所示1、ARPManipulationEnabled：允许ARP处理，需要打开。2、TFTPServerenable：允许，需要打开。3、oninterface：默认是本机IP。SupportQQ:3420808394、DirectoryCMP或是INI文件存放的目录，如果不是请选择对应的CMP文件或INI文件(软件中自带)其它的选项默认。1.2.2修改IP1、将设有静态IP地址的电脑用交叉线与设备相连，或是在同一个网络交换机下。2、打开BootP软件，将常用工具栏设置如下图所示：3、点击常用工具栏中的“编辑客户端”弹出如下窗口：4、点击“添加新的客户端”出现如下对话框：SupportQQ:3420808395、添写右选项框信息：ClientMAC：添写需要配置的中继网关的MAC地址ClientName：针对这个MAC地址起一个名称，随便写一个即可Template：保持默认即可IP：设定网关的IP地址，必须和PC机在同一网段Subnet：设置网关子网掩码（必须和连接的PC机的子网掩码一样）Gateway：设置默认网关TFTPServerIP：默认是本地电脑的IP地址，如果不是关掉BootP软件重新设置电脑IP为静态IP地址。下边的选项保持默认。6、点击Apply然后点OK，BootP软件不要关掉，将网关断电隔5S重新加电，正常在BootP软件视图区可以看到操作信息（包括MAC地址和IP地址等信息）7、大约1分钟后可以通过新的IP地址访问网关。2MP114配置端口呼入、呼出2.1ProtocolManagement—ProtocolDefinition—DTMF&Dialing设置MaxDigitsinPhoneNum(电话号码的位数)，其他配置为默认。设置完成后点击Submit保存如图：SupportQQ:3420808392.2ProtocolManagement—AdvancedApplications—FXOSettings配置DialingMode（拨号模式）为OneStage（一次拨号）其他配置为默认,设置完成后点击Submit保存。当与MP118AudioCodes搭配时需设置为TwoStage。如图：SupportQQ:3420808392.3ProtocolManagement—EndpointPhoneNumbers配置本端S口号码（可设为任意