IBM-V7000-集群配置

IBMIBMIBMIBMv7000v7000v7000v7000集群集群集群集群(Cluster)(Cluster)(Cluster)(Cluster)配置配置配置配置—厦门市安腾科技有限公司有2台IBMv7000做集群，需要将v7000_2控制柜添加到v7000_1控制柜中，每台控制柜都带有2个扩展柜。需要将v7000_2控制柜为无任何配置状态。在交换机中，建立zone,内部包含2个控制柜，4个节点的fcport(即将2台v7000的node1和node2共4个控制器，划分在同一个zone里)。通过服务助手IP(192.168.70.121/122)进入服务助手工具配置界面。(注：图片中的v7000命名和文档不同)1.清除V7000_2信息a.Makesuretwocontrolenclosurehavethesamefirmware.Starttheserviceassistantononeofthenodecanisters,loginserviceGUIbyserviceip.b.Usetheserviceassistantnodeactiontoholdthenodeinserviceserviceserviceservicestate.图1-1使2个控制器进入服务状态c.UsetheManageManageManageManageSystemSystemSystemSystemoptiontoremoveremoveremoveremovethethethetheclusterclusterclusterclusterdatadatadatadatafromthenode.图1-22个控制器都“除去系统数据”d.Performthepreviousstepsonthesecondnodecanisterintheenclosure.Note:Insteadofconnectingtotheothernode,youcanmakethesecondnodethecurrentnode.e.OpentheserviceassistantConfigureConfigureConfigureConfigureEnclosureEnclosureEnclosureEnclosureandselectResetResetResetResetClusterClusterClusterClusterIDIDIDIDoption.Thisactioncausesthesystemtoreset.图1-3重置系统标识f.Powerthesystemoffandonbeforecreatingacluter.*在serviceGUI中，分别将2个nodepoweroff，之后关闭电源。等待几分钟，重新开启电源。V7000_2控制柜启动完成后，登录serviceGUI，确定2个node的状态为candidate(候选)。2.添加v7000_2控制柜到V7000_1官方指南见以下链接：=%2Fcom.ibm.storwize.v7000.640.doc%2Ftbrd_qicfgsys_addctlencl_b433xw1.htmla.StartthemanagementGUI.b.GotoMonitoringMonitoringMonitoringMonitoringSystemSystemSystemSystemDetailsDetailsDetailsDetails.c.Selectthesystemnameinthetree.d.GotoActionsActionsActionsActionsAddAddAddAddEnclosuresEnclosuresEnclosuresEnclosuresControlControlControlControlandandandandExpansionsExpansionsExpansionsExpansions.e.Continuetofollowtheon-screeninstructions.3.添加成功后状态通过服务IP连到v7000_2上，可见以下状态：图2-1v7000_2服务界面显示4个控制器其中，node1,node2是v7000_1的A,B控制器，显示system关系；node3,node4是v7000_2的A,B控制器。连到v7000_1的管理界面，可看见6个机柜，如下所示：图2-2v7000_1管理界面显示集群