资源勘查工程专业毕业设计 (东华理工大学长江学院)

东华理工大学长江学院毕业设计题目：青海省XXXXXXX地区超基性岩铜、镍矿预查设计英文题目：XXXXXXXinQinghaiProvinceTimberwolvesditchareaultrabasicrocksofcopper,nickelorepre-screeningdesign学生姓名：XXXXXXXX申请学位门类：工学学位学号：XXXXXXXXX专业：资源勘查工程系别：资源勘查工程系指导教师：XXX职称：教授二O一三年五月六日东华理工大学长江学院毕业设计摘要摘要本预查设计是针对青海省XXXXXX超基性岩铜镍矿进行的。主要在收集前人工作的地质资料基础上，结合本次野外踏勘和地球物理资料分析完成的。野外踏勘发现铜矿化点一处，由于该类型的铜镍矿一般产于岩体底部。为精确验证矿化的可靠性按照勘探规范对该地区布设了1：5000高精度磁法、1:2000高精度磁法、1:5000激电中梯测量及1:5000大地音频测量。通过物探圈定2处异常区。为精确验证异常区与矿化的关系，针对该异常区布设了4个钻孔加以验证。同时为控制南段铜矿化的走向，对此布设了11个探槽。关键词：超基性岩铜镍矿；铜矿化；异常区；钻孔；探槽东华理工大学长江学院毕业设计abstractABSTRACTThedesignisforapre-investigationWulanCountyinQinghaiProvinceTimberwolvesditchultrabasicnickel-coppermineperformed.Previousworkmainlyincollectinggeologicaldatabasedonthecombinationofthisfieldreconnaissanceandgeophysicaldataanalysiscompleted.Fieldreconnaissancediscoveredcoppermineralizationpointone,becausethistypeofcopper-nickeloregenerallyproducedintherockbottom.Toaccuratelyverifythereliabilityofthemineralizationintheregioninaccordancewithspecificationslaidtheexplorationofhigh-precisionmagnetic1:5000,1:2000precisionmagneticmethod,intermediategradient1:50001:5000geodeticsurveyingandaudiomeasurements.Bygeophysicalanomaliesdelineatedtwoareas.Toaccuratelyverifytherelationshipbetweentheabnormalareaandmineralizationfortheanomalyzoneemplacedfourholestobeverified.Whilecopperforthecontrolofthesouthernsectionofthestrike,whichlaidthe11trenches.Keywords:Ultrabasicrockscopper-nickelmine；Coppermineralization；Anomaly；Drilling；Trenches东华理工大学长江学院毕业设计目录目录第1章绪言............................................................11.1目标任务........................................................11.1.1工作目的..................................................11.1.2设计主要实物工作量........................................11.2预查区交通位置及工作范围........................................41.3预查区自然地理及经济概况........................................41.4以往地质工作程度及评述..........................................41.4.1以往地质工作程度..........................................41.4.2以往地质工作评述..........................................5第2章区域地质........................................................62.1地质特征........................................................62.1.1地层......................................................62.1.2构造......................................................62.1.3岩浆岩....................................................72.2区域矿产特征....................................................92.2.1沙柳河铬铁矿..............................................9第3章预查区地质特征.................................................113.1地层...........................................................113.2构造...........................................................113.3岩浆岩.........................................................123.4基性-超基性岩体岩石化学特征....................................133.5预查区物探异常特征.............................................133.5.1高精度磁测异常特征.......................................133.5.2激电中梯异常特征.........................................143.5.3CSAMT剖面异常特征........................................173.6矿化特征.......................................................193.7成矿条件分析...................................................20第4章工作部署.......................................................214.1工作部署依据...................................................214.2具体实施方案...................................................214.2.1探槽.....................................................214.2.2钻探.....................................................224.3工作进度安排...................................................23第5章工作方法及技术要求.............................................235.1探槽工程.......................................................245.2钻探工程.......................................................245.2.1钻探工程质量要求.........................................245.2.2钻孔定位.................................................255.2.3钻孔施工要求.............................................255.2.4钻孔地质编录要求.........................................265.2.5钻孔质量验收.............................................26东华理工大学长江学院毕业设计目录5.3样品采集、测试.................................................265.3.1样品采集及质量要求.......................................265.3.2各类样品的测试及质量要求.................................275.4资料整理工作...................................................275.4.1原始地质资料整理.........................................275.4.2资料综合整理.............................................275.4.3报告编写.................................................28第6章设计工作量及经费预算...........................................296.12013年计划工作量..............................................296.2经费预算.......................................................296.2.1预算编制依据..............................................296.2.2采用的费用标准和计算方法.................................296.2.3预算表...................................................29第7章组织管理和技术措施.............................................327.1组织管理.......................................................327.1.1生产管理.................................................327.1.2安全管理.................................................327.1.3人员配置及设备配置........