H3C组播配置和维护

组播配置和维护构建H3C高性能园区网络1.0杭州华三通信技术有限公司版权所有，未经授权不得使用与传播UnRegisteredn本章介绍了组播的配置命令、维护命令并给出配置实例。引入掌握组播维护命令课程目标学习完本课程，您应该能够：UnRegisteredn组播配置命令n组播维护命令n组播配置实例目录UnRegistered组播基本配置l全局启动组播应用l进入IGMP视图[H3C]multicastrouting-enable[H3C]igmpUnRegisteredIGMP配置命令l配置IGMP的版本àIGMP视图配置全局IGMP版本à接口视图配置IGMP版本[H3C-igmp]versionversion-number版本[H3C-Vlan-interface100]igmpversionversion-numberUnRegisteredIGMP配置命令（续）l接口视图使能IGMPl配置发送普遍查询报文的时间间隔[H3C-Vlan-interface100]igmpenable配置普遍查询报文最大响应时间[H3C-Vlan-interface100]igmptimequeryinterval[H3C-igmp]max-response-timeintervalUnRegisteredIGMPSnooping配置命令l全局和VLAN视图使能IGMPSnoopingl配置端口快速离开功能[H3C]igmp-snooping[H3C-vlan2]igmp-snoopingenable配置模拟主机加入[H3C-Ethernet1/0/1]igmp-snoopingfast-leavevlanvlan-list[H3C-Ethernet1/0/1]igmp-snoopinghost-joingroup-address[source-ipsource-address]vlanvlan-idUnRegisteredIGMPSnooping配置命令（续）l配置未知组播丢弃l配置查询器[H3C-vlan2]igmp-snoopingdrop-unknown[H3C-vlan2]igmp-snoopingquerier配置特定组查询报文的源地址[H3C-vlan2]igmp-snoopinggeneral-querysource-ipip-address[H3C-vlan2]igmp-snoopingspecial-querysource-ipip-addressUnRegistered组播VLAN命令l配置组播VLANl向组播VLAN内添加子VLAN[H3C]multicast-vlanvlan-id[H3C-mvlan-100]subvlanvlan-listUnRegisteredPIM配置命令l在接口启动PIM-DMl在接口启动PIM-SM[H3C-Vlan-interface100]pimdm[H3C-Vlan-interface100]pimsm优先级[H3C-Vlan-interface100]pimsm[H3C-Vlan-interface100]pimhello-optiondr-PriorityPriorityUnRegistered配置RPlPIM视图配置静态RPl配置候选rp[H3C-pim]static-rprp-address[preferred][H3C-pim]c-rpinterface-typeinterface-number[H3C-pim]c-rpinterface-typeinterface-numberprioritypriority[H3C-pim]c-bsrinterface-typeinterface-number[hash-length[priority]]UnRegisteredn组播配置命令n组播维护命令n组播配置实例目录UnRegistered查看组播路由和转发信息l查看组播路由表l查看组播转发表H3Cdisplaymulticastrouting-tableH3Cdisplaymulticastforwarding-table二层组播配置示例MulticastSourcePCBE1/0/2E1/0/1VLAN100VLAN1010.10.10.1/2410.10.10.3/24介绍了组播基本配置和维护命令n给出三层组播和二层组播的配置实例本章总结UnRegistered杭州华三通信技术有限公司